Factory Photos — Shouguang Plant
Shandong Wanrong Mould & Die operates a 12,000 m² plant in Shouguang, Shandong, with its own aluminium foundry, pattern shop and CNC machining. The photos on this page were taken on site. None are stock images.
Use these photos when you need evidence that the plant, CNC shop and pattern shop are real. Visit photographs are held until the visitors have given written consent.
Plant
Gate, team and the WR mark at the Shouguang site.
Entrance gate of Shandong Wanrong Mould & Die Co., Ltd. in Shouguang, Shandong
Wanrong Mold team in front of the plant building
Plant wall with the Wanrong Mold name and WR mark
CNC machining
Machining centres and the gantry mill on one floor.
CNC machining hall with numbered machining centres and overhead crane
Panorama of the CNC hall with machining centres along both sides
Operator at a CNC gantry mill machining a mold body
Assembly
Mold bodies assembled and trialled in the same plant.
Mold assembly bay with overhead cranes and mold bodies on the floor
Patterns and sand molds
Wooden patterns and sand molds made on site. The foundry floor itself is not shown.
Close-up of a four-cavity sand mold made on site
Wooden foundry pattern marked out on the pattern-shop bench
Mold samples
Finished EPS molds photographed on site.
Four-cavity EPS mold with green release coating
Elongated cavity sections for a television packaging mold
Multi-cavity mold plate for appliance drain pans
Steam-chest mold with vent nozzles across the cavity plate
Open EPS mold with the foam parts it produces laid beside it
Multi-cavity EPS mold for box-shaped foam parts
Open EPS mold with matching foam parts laid beside the cavity plate
Packing
Parts packed in a wooden crate for shipment.
Mold parts packed in a wooden export crate
Seen enough? Send the drawing.
A part drawing or a photograph of a finished foam part is enough to start a tooling proposal. We reply on business days, Monday to Friday, 09:00–18:00 China Standard Time (UTC+8).